Moving The Machine; Provide Adequate Installation Space; Handling Precautions - Canon imageRUNNER ADVANCE 500i Handbuch Für Starter

Moving the Machine

If you intend to move the machine, even to a
●
location on the same floor of your building,
contact your local authorized Canon dealer
beforehand. Do not attempt to move the machine
yourself.

Provide Adequate Installation Space

Provide enough space on each side of the machine for
unrestricted operation.
When no optional products are attached:
●
100 mm
935 mm
540 mm
When the Staple Finisher-R1 is attached:
●
100 mm
935 mm
540 mm
1,276 mm
08
Installation Location and Handling
881 mm

Handling Precautions

Do not attempt to disassemble or modify the
●
machine.
Some parts inside the machine are subject to
●
high-voltages and temperatures. Take adequate
precautions when inspecting the inside of the
machine. Do not carry out any inspections that are
not described in the manuals for this machine.
Be careful not to spill liquid or drop any foreign
●
objects, such as paper clips or staples inside the
machine. If a foreign object comes into contact
with electrical parts inside the machine, it might
cause a short circuit and result in a fire or electrical
shock.
If there is smoke, or unusual noise, immediately
●
turn the main power switch OFF, disconnect
the power cord from the power outlet, and
then call your local authorized Canon dealer.
Using the machine in this state may cause a fire
or electrical shock. Also, avoid placing objects
around the power plug so that the machine can be
disconnected whenever necessary.