Canon imageRUNNER ADVANCE 500i Handbuch Für Starter Seite 40

IMPORTANT
The default setting for both the System Manager ID
and System PIN is '7654321' . Make sure to change
these settings.
14
Recalibrating the Gradation and
Density Settings of the Machine
Precisely
The procedure involves making test pages and
placing them on the platen glass for scanning.
Once this is complete, the machine
automatically corrects the irregularities.
IMPORTANT
Three test pages are output by the machine during
this adjustment.
1. Press [Both].
2. Select the paper source → press [OK].
3. Press [Start Printing].
4. Place the first test page on the platen glass →
press [Start Scanning].
*1
*1 Place the test page face down on the
platen glass, with the black band along
the left edge of the platen glass
5. Remove the first test page from the platen
glass → press [Start Printing].
6. Repeat steps 4 and 5 two more times.
7. Remove the third test page from the platen
glass.
32
Using the Setup Guide to Configure the Machine
15
Closing the Setup Guide
Closing the Setup Guide by pressing [OK]
causes the machine to restart.
After the restart, the main menu is displayed
and you can use the machine.
▼