Routine Cleaning; Cleaning The Platen Glass And Underside Of The Feeder; Manual Feeder Cleaning - Canon imageRUNNER ADVANCE 500i Handbuch Für Starter

Routine Cleaning

If the original is not copied clearly, clean the following parts of the machine. For high-quality printouts,
we recommend cleaning these parts once or twice a month.
Platen glass
●
Underside of the feeder
●
Feeder scanning area and rollers
●
• When cleaning the machine, first turn OFF the main power switch, and disconnect the power cord . Failure
to observe these steps may result in a fire or electrical shock .
• Disconnect the power cord from the power outlet regularly, and clean the area around the base of the
power plug's metal pins and the power outlet with a dry cloth to ensure that all dust and grime is removed .
If the power cord is connected for a long period of time in a damp, dusty, or smoky location, dust can build
up around the power plug and become damp . This may cause a short circuit and result in a fire .
IMPORTANT
• When cleaning with a cloth, do not dampen it too much, as this may damage the original or break the
machine.
• Do not use alcohol, benzene, paint thinner, or other solvents for cleaning. Doing so may result in damage to
the plastic parts.
Cleaning the Platen Glass and
Underside of the Feeder
If the platen glass or the underside of the feeder is
dirty, the original may not be scanned clearly. Clean the
platen glass and the underside of the feeder by
following the procedure below.
01
Clean the platen glass and the
underside of the feeder with a cloth
which is wrung after being dampened
in water, and then wipe them clean
with a soft, dry cloth.
1. Clean the platen glass.
2. Clean the underside of the feeder.
NOTE
If stains won't come out, use detergent instead of
water.
54

Routine Cleaning

2
1

Manual Feeder Cleaning

If originals that have been fed through the feeder have
streaks or appear dirty, clean the feeder's rollers.
It is recommended that you clean the rollers of the
feeder with a cloth which is wrung after being
dampened in water, and then wipe them clean with a
soft, dry cloth.
IMPORTANT
• Spin the rollers while cleaning them.
• If the document feed scanning area is dirty,
documents may not be scanned clearly.
• Do not dampen the cloth too much, as excess
water may damage the machine.
01
Gently open the
*: Feeder Cover
When the feeder cover is completely opened,
the inner cover is also opened.
feeder cover.
*