Replacing The Waste Toner Container - Canon imageRUNNER ADVANCE 500i Handbuch Für Starter

IMPORTANT
• Use only toner cartridges intended for use with
the machine. (See "Consumables," on p. 57.)
• Do not touch the opening of the toner cartridge or
subject it to shock by hitting it. Doing so may
cause the toner to leak out of the cartridge.
05
Insert the new toner cartridge in the
toner supply port as far as it will go.
NOTE
Support the new toner cartridge with your hand from
underneath while pushing it into the machine with
your other hand.
06
Turn the toner cartridge lock lever
clockwise so that the arrow marks on
the lever and its axis face each other.
*: Toner Cartridge Lock Lever
07
When closing the covers, be careful not to get your
fingers caught, as this may result in personal injury .

Replacing the Waste Toner Container

When the waste toner container nears capacity, a
message appears on the touch panel display. In this
case, you should prepare a new waste toner container.
When the waste toner container is full, a screen with
instructions on how to replace the waste toner
container appears on the touch panel display. You can
follow the procedure described below to replace the
waste toner container.
Even if you do not replace the waste toner container
immediately, you can perform printing for a while. The
number of prints you can make depends on the
content you print.
However, if you continue printing, an error will occur
and you will become unable to print.
• Do not burn or throw used waste toner containers
into open flames . Also, do not store waste toner
containers in places exposed to open flames, as
this may cause the toner to ignite, resulting in
burns or a fire .
• If you accidentally spill or scatter toner, carefully
gather the toner particles together or wipe them
up with a soft, damp cloth in a way that prevents
inhalation . Never use a vacuum cleaner that does
not have safeguards against dust explosions to
clean up spilled toner . Doing so may cause a
*
malfunction in the vacuum cleaner, or result in a
dust explosion due to static discharge .
Replacing the Toner Cartridge/Waste Toner Container
Close the front cover.
1. Close the front cover of the main unit.
2. Lower the control panel back in place.
47