Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
05
Remove the waste toner container.
When removing the waste toner container, be
careful not to tilt it, as the toner may spill and get
onto your hands or clothing .
06
Detach the cap mounted on the side
of the container, and use it to seal the
opening so that the waste toner does
not spill out.
07
Unlock the drum unit by turning the
drum unit lock lever
counterclockwise until it stops.
*: Drum Unit Lock Lever
*
08
While lifting the lever under the tab,
slowly pull the drum unit until the
blue marking
appears.
*: Blue Marking
09
Holding the part with the blue
marking, pull the drum unit out
slightly upward.
10
Remove the drum unit from its
protective bag.
IMPORTANT
•
Do not touch or expose the cylindrical, blue-green
part to light for a long time, as the print quality
may deteriorate.
•
Do not expose the drum unit to direct sunlight or
strong light.
•
Condensation (water droplets on the inside or
outside) may form on the drum unit when it is
brought into an environment with a sudden
change in temperature or humidity. When moving
a new drum unit to a location with change in
temperature, leave the drum unit in the protective
bag at the new location for two or more hours to
allow it to adjust to the new temperature.
Replacing the Drum Unit
*
51
Werbung
Inhaltsverzeichnis
