Product Overview / Package Contents; Package Contents - JL Audio Fathom IWS 113-A Bedienungsanleitung

IMPORTANT
| Fathom
IWSv2
®
PRODUCT OVERVIEW
JL Audio Fathom IWSv2 subwoofers combine a state-of-the-art JL Audio
subwoofer driver and electronics/amplifier package with a highly optimized
enclosure to deliver an exceptional listening experience in your home theater or
home audio system.
The subwoofer driver in your Fathom v2 subwoofer system is capable
of outstanding linear excursion without distress or audible distortion. This
reference-quality driver enables your Fathom v2 to reproduce powerful low
frequency events with stunning impact and unprecedented accuracy.
To get the most from this long excursion driver platform, prodigious amounts
of controlled power are needed. Our electronics engineering team conducted
an intense analysis of typical program material and its dynamic demands in
order to balance current draw and actual output power requirements relative to
the system's impedance characteristics. After careful study, a pair of precisely
engineered switching amplifiers employing
were created. These advanced designs are capable of unclipped output voltages
equivalent to 1000 watts (System 1) and 2000 watts (System 2) of RMS power
when referenced to the nominal loudspeaker impedance, allowing us to take full
advantage of each driver's full excursion envelope.
The beautiful cabinet enclosing the workings of your Fathom v2 is also the
result of careful engineering. To contain the pressures created by the Fathom
driver, we utilized CNC-cut, cabinet-grade baltic birch plywood with extensive
internal bracing features and advanced assembly techniques.
Your listening room is the other enclosure that affects the way your bass will
sound. All rooms create a specific sonic signature, which must be effectively
managed to achieve well-balanced low frequency performance. To aid in this
process, the Fathom v2 includes an extensive set of signal processing tools aimed
at optimizing your Fathom v2's performance within your listening space. These
features include JL Audio's exclusive Digital Automatic Room Optimization
system. This system deploys eighteen bands of digital equalization to tame room
acoustics and deliver spine-tingling sub-bass accuracy.
As you can see from this brief introduction, there is a lot of technology in this
in-wall subwoofer. The contents of this manual will explain the features, guide
you through the setup and tuning of your Fathom v2 subwoofer and help you
achieve your ultimate low-frequency listening experience.
If you require assistance, we urge you to contact your authorized JL Audio
retailer for expert setup advice and service.

PACKAGE CONTENTS

The Fathom IWSv2 Amplifier is shipped from the factory with:
• Owner's Manual
• (2) Neutrik speakOn® Speaker Connectors (NL2FX)
• (2) Rack Mounting Ears (pre-installed)
• (2) Front Panel End Covers
• (4) Rubber Feet (with mounting hardware)
• IEC Power Cord (3-prong)
• JL Audio Calibration Microphone
IMPORTANT! IT IS A VERY GOOD IDEA TO READ THE NEXT SECTION BEFORE
UNPACKING YOUR FATHOM IWS. UNPACKING THE SUBWOOFER NEAR ITS
FINAL LOCATION IS RECOMMENDED.
feedback technology
innovative
Pg 5 | EN