JL Audio Fathom IWS 113-A Bedienungsanleitung Seite 26

STEREO ACTIVE CROSSOVER (BALANCED OUTPUTS)
LOW OUT
(SUB OUT)
WARNING! TURN OFF THE FATHOM IWSv2 AND ALL OTHER EQUIPMENT IN
THE SYSTEM BEFORE MAKING OR CHANGING ANY CONNECTIONS!
EN | Pg 26
STEREO ACTIVE CROSSOVER (UNBALANCED OUTPUTS)
OR
FATHOM REAR CONTROLS (MASTER)
FATHOM REAR CONTROLS (MASTER)
LOW OUT
(SUB OUT)
LEFT RIGHT
SYSTEM CONNECTION DIAGRAM 4:
Two Fathom IWSv2s in Stereo to
Two-Channel Audio System
When connecting two Fathom IWSv2s
in stereo to a two-channel audio system
you will only use the "Left or Mono"
inputs of each Fathom IWSv2. The "Input
Mode" switch on each Fathom IWSv2
will be set in the "Master" position.
We strongly recommend that you
use a high-quality active crossover
to divide your preamplifier's signals
prior to connection to the Fathom
IWSv2 and to the amplifier driving
your main speakers. This will allow
you to filter low frequencies out of the
signals driving the main speakers,
resulting in better performance.
If you are not using an active crossover
and are comfortable running your main
speakers full-range, you can split your
preamplifier's output signals using
appropriate Y-connectors in place of the
active crossover shown in the diagram.
Two connection types are available
for connecting the Fathom IWSv2s to
your two-channel audio system: balanced
(XLR or 1/4-inch TRS connector) and
unbalanced (RCA-type connector).
Balanced connections provide superior
noise rejection and ensure proper
grounding between components. If your
preamplifier or active crossover offers
balanced outputs, we highly recommend
that you use them.
In the connection diagram at right,
balanced connections are shown as solid
lines, unbalanced connections are shown
dotted. You will only use one of these
input connection methods (not both).
NOTE: If desired, additional Fathom
IWSv2s can be connected in "Slave" mode
to each Fathom IWSv2 connected as
shown on this diagram. See "Connection
Diagram 2" on page 24 for slave
connection explanation.
WARNING
| Fathom
IWSv2
®