Installation; Appliance Transport; Appliance Positioning; Electrical Connection - Olimpia splendid PELER 10 WIFI Gebrauchs - Und Wartungsanweisungen

2 -

INSTALLATION

2.1 - APPLIANCE TRANSPORT

Transport and handling of the appliance must be carried out in
vertical position.
CAUTION
Moving the cooler on delicate flooring (e.g. wooden flooring):
• Empty the water tank.
• Take great care when moving the cooler as the wheels could
mark the flooring. Although the wheels are made from a rigid
material and are swivelling, they could get damaged by use or
excessive dirt.
It is recommended to check that the wheels are clean and that
they can move freely.

2.2 - APPLIANCE POSITIONING

A failure to respect what follows may cause damages to the
appliance.
a. Position the appliance on flat, stable surfaces
and on the floor.
b. The appliance must only be connected
to earthed power outlets.
c. Make sure that curtains or other objects
do not obstruct the air suction filters.
d. Make sure to keep a minimum distance
of 15 cm (Fig.B) between the cooler
and the adjacent figures.
e. The appliance must always be activated paying attention that there are
no obstacles for air suction and output.
f.
Do not use the appliance in places used as laundry rooms.
g. The appliance must only be installed in dry places.
h. The cooler must not be started in presence of dangerous materials,
steams or liquids.
i.
Clean the air filters at least once a week.

2.3 - ELECTRICAL CONNECTION

The appliance is fitted with a power cable with plug.
Before connecting the cooler ensure that:
• The voltage and power frequency values match those specified on the
appliance plate data.
EN - 9
PELER 10 WIFI