Symbols Used On The Saw; General Safety Directions For Power Tools - Parkside PGHSA 20-Li A1 Originalbetriebsanleitung

GB
Notice symbol with information on
how to handle the device properly
Wear protective gloves in order to
avoid cutting yourself!

Symbols used on the saw

Before working with the cordless
garden pruner, familiarise yourself
with all the controls. Practise han-
dling the device (by cutting logs to
size on a sawhorse) and have the
functionality, mode of action, saw-
ing techniques and personal safety
equipment explained to you by an
experienced user or an expert.
Read and take note of the operat-
ing manual belonging to the ma-
chine
Wear protective goggles.
Always use the chainsaw with both
hands.
Beware of chainsaw kickback
and avoid touching the guide rail
tip.
Remove the battery prior to ser-
vicing the appliance.
Do not expose the unit to rain. The
device must not be wet, nor should
it be operated in a moist environ-
ment.
Cutting hazard!
Keep hands away.
192 mm
Length of the chain bar
32
Machines do not belong with do-
mestic waste.
Guaranteed sound power level
This device is part of the
X 20 V TEAM series
Graphical symbol above the chain
sprocket:
Saw chain oiling.
Observe direction of travel of the saw
chain. Attention! Read the instruction manual.
Graphical symbol on the blade:
Direction of travel of the saw
chain
Graphical symbol on the fi xing screw for
the chain sprocket cover:
OPEN
CLOSE
General Safety Directions for
Power Tools
WARNING! Read all safety
notices, instructions, illustra-
tions and technical data that
have been provided with this
power tool. Omissions in the
compliance with safety directions
and instructions can cause electrical
shock, fi re and/or severe injuries.