Functional Description; Technical Data; Safety Instructions; Symbols And Icons - Parkside PTK 2000 E3 Originalbetriebsanleitung

18
30 Slot in the riving knife
19
31 Screw with knurled nut and wing nut
26
32 Cam lever
29
33 Groove
34 Knurled screw
35 Laser
31
36 Laser switch
37 Screw for battery compartment
32
38 Battery cover
37
39 Stop rail
40 Transverse stop

Functional description

The table circular saw is used for cutting all types of wood lengt-
hwise and crosswise (only with the transverse stop), depending
on the machine size. All types of round timbers must not be cut
with it.

Technical data

Bench circular saw............................................................... PTK 2000 E3
AC motor ......................................................... 230
Power ...................................................................2000 Watt
Operating mode ...................................................... S6 40%*
Safety class .....................................................................
Protection category.......................................................... IPX0
Idling speed .......................................................... 4800 min
Carbide saw blade (Dimensions to be used)
..........................................................ø 254 x ø 30 x 2.8 mm
Idling speed saw blade, n max. .............................. 7000 min
Number of teeth .........................................................24 / 48
Thickness riving knife ...................................................2.5 mm
min. Workpiece size WxLxH ............................... 10x50x1 mm
Table size ........................................................ 630 x 545 mm
Table size with all three extensions ..................... 880 x 930 mm
Cutting height max. 90° ................................................87 mm
Cutting height max. 45° ................................................63 mm
Height adjustment ................................................... 0 - 87 mm
Saw blade, swivelling ...................................................0 - 45°
Extraction connection .................................................ø 34 mm
Weight ............................................................. approx 20 kg
Laser class ...........................................................................2
Laser wavelength ....................................................... 650 nm
Laser power ............................................................. < 1 mW
Laser module power supply
........................................................... 2 x 1.5 V Micro (AAA)
Sound pressure level
(L ) ..................................................93.7 dB(A); K
pA
Sound power level (L )
WA
measured ......................................... 106.7 dB(A); K
guaranteed .........................................................108 dB(A)
* Operating mode S6 40%: Continuous operation with intermittent load
(cycle time 10 min). In order not to heat the motor more than permitted,
the motor may only be operated for 40% of the cycle time with the stated
nominal power and must then continue running for 60% of the cycle time
without a load.
This appliance is intended to be operated using a mains supply
network with a system impedance (internal resistance of the
mains) Zmax on the transfer point (house connection) of maxi-
mum 0.5367 Ohm. The user must ensure that the appliance is
only operated using a mains supply network meeting the require-
ments. If necessary, local power supply companies can be con-
sulted with regards to the system impedance.

Safety instructions

CAUTION! The following basic safety precautions must be ob-
served while using electric tools to protect against electric shock,
injury and risk of fire. Please read all instructions before using
this electric tool and keep the safety instructions in a safe place.

Symbols and icons

Symbols on the appliance:

Carefully read these Operating Instructions.
Wear eye protection.
Wear ear protection.
V~ 50Hz Wear breathing protection.
Caution - Risk of injury.
II Never reach into the running blade.
-1 Do not expose the unit to rain. The device must not be
wet, nor should it be operated in a moist
-1 Caution! - Laser radiation. Do not look into the beam.
Laser class 2
This label is attached to the saw blade guard.
Information of the acoustic power level L
108
Safety class II (Double Isolated)
Electrical appliances must not be disposed of with the
= 3 dB domestic waste.
pA
Graphical symbol additionally on the saw
= 3 dB
WA
blades
Caution - a damaged blade must not be used under any
circumstances. Replace the saw blade immediately.
GB IE
environment.
in dB.
WA
23