Warnings And Symbols Used; Introduction; Intended Use - Parkside PTS 710 B2 Bedienungs- Und Sicherheitshinweise

The following warnings are used in this instruction manual, on the packaging and on the rating label:
Read the instruction manual.
Follow the warnings and safety notes!
Risk of electric shock!
Maximum depth cut
CE mark indicates conformity with
relevant EU directives applicable for
this product.
ELECTRIC PLUNGE SAW
˜ Introduction
We congratulate you on the purchase of your
new product. You have chosen a high quality
product. The instructions for use are part of the
product. They contain important information
concerning safety, use and disposal. Before using
the product, please familiarise yourself with all
of the safety information and instructions for use.
Only use the product as described and for the
specified applications. If you pass the product on
to anyone else, please ensure that you also pass
on all the documentation with it.
6 GB/IE/NI

Warnings and symbols used

Switch off the product and disconnect
it from the mains before making any
adjustments, performing maintenance,
cleaning and when the product is not
in use.
Protection class II (double insulation)
Alternating current/voltage
Direct current/voltage
UKCA mark indicates conformity with
relevant Great Britain regulations
applicable for this product (The UKCA
mark logo is valid in Great
Britain only).
˜ Intended use
This electric plunge saw (hereinafter "product" or
"power tool") is suitable for sawing longitudinal
and cross cuts in a plunge cut into firmly
supported following materials:
Solid wood
Chip board
Plywood
Aluminium
Tiles
Stone
Plastics
Lightweight construction materials