Personnel Competence; Intended Area Of Application; Incoming Goods - flamco NFE-MVE Montage- Und Serviceanleitung

4.3 Personnel competence

Instructions for operation are provided by the Flamco field sales service or officers during handover
activities or upon request.
Training for the required performances: assembly, disassembly, commissioning, operation, testing,
maintenance and repair are part of the training and further education of the service personnel from
the Flamco branches or designated service companies.
This training includes instructions with regard to the prerequisites required on site but not with
regard to their execution. On-site services include transportation, the provision of an operating room
with the required basic structure for arranging and installing the equipment as well as the necessary
hydraulic and electrical connections, the electrical installation for powering the replenishment
equipment and the installation of signal lines for information technology equipment.

4.4 Intended area of application

Closed heating and cooling systems within which it is possible to operate pressurisation systems
with diaphragm pressure expansion vessels, as well as the external pressurisation with compressor
or pump in accordance with the requirements of DIN EN 12828 and VDI 4708-1, and the controlled
supply of process water for loss or initial filling quantities. Modular assemblies of this replenishment
equipment can be selected in accordance with the application required.

4.5 Incoming goods

The scope of supply must be compared with the items listed in the shipping documents and checked
for conformity. Unpacking, installation and commissioning must only be initiated if the product
complies with the intended use within specifications in accordance with the order process and order
commission. In particular, functional obstructions, component damage and personal hazards can be
caused if permissible operating or design characteristics are exceeded. If there is no conformity and
if the scope of supply is incomplete or damaged, application must be prevented.
7
We reserve the right to change designs and technical specifications of our products.