Installation; Setting Up/Mounting - flamco NFE-MVE Montage- Und Serviceanleitung

8. Installation

8.1 Setting up/mounting

• The installation must be carried out such that secure, horizontal mounting is ensured and
maintained taking into account the weights of the modules (see Technical Data).
• Preferably wall mounting is to be used. (The control unit need not be attached additionally. It
remains on the clamp mounting on the T-piece of MVE1.)
• However, the modules can also be fixed to other suitable mounting points with the aid of the
enclosed Flamco pipe clamps of the BSA series.
• The replenishment modules are to be mounted free from support forces and other external
additional loads. Prevent the weld metal and dirt from getting onto or into the equipment
components of the replenishment modules during installation work.
NFE1.x + MVE1
BSA3/4"- BSA1/2"-
mounting point mounting point
NFE2.x + MVE1
BSA3/4"-
mounting point
NFE3 + MVE1
HT pipe
DN40
BSA1/2"-
mounting point
BSA3/4"-
mounting point
We reserve the right to change designs and technical specifications of our products.
NFE1.x + MVE2
BSA3/4"- BSA1/2"-
mounting point mounting point
NFE2.x + MVE2
BSA3/4"-
mounting point
BSA1/2"-
mounting point
NFE3 + MVE2
BSA3/4"-
mounting point
HT pipe
DN40
21