Intended Use And Application Of These Instructions; Personnel Qualification, Prerequisites - flamco NFE-MVE Montage- Und Serviceanleitung

4.1 Intended use and application of these instructions

The following pages give the basic information, requirements, measures and technical specifications
that enable competent personnel to handle and use this product safely and within specifications.
Responsible persons or agents who perform the services required must have carefully read and
understood these instructions.
The required performances are:
Storage, transportation, installation, electrical installation, initial commissioning and
recommissioning, operation, maintenance, testing, repair and removal.
For use in installations that do not comply with the applicable European regulations, European and
harmonised standards and applicable technical rules and guidelines issued by the professional
associations for this area of application, this document is not suitable and can be used for
information purposes only. In order to be continuously available for consultation, these instructions
must be provided in the immediate vicinity of the installed device, at least within the relevant
operating room.

4.2 Personnel qualification, prerequisites

All personnel must have the appropriate qualifications for performing the required services and be
physically and mentally qualified. The areas of responsibility, competence and supervision of the
personnel must be regulated by the operator.
Required performance
Storage, transportation
Assembly, disassembly, repair, maintenance.
Recommissioning following addition of
component or modification, testing.
Initial commissioning with configured control
unit (standard case), recommissioning after
voltage failure, operation (actions on the
terminal and the control unit SPC).
Electrical installation
Initial and repeat testing of the electrical
equipment.
Testing before commissioning and repeat
testing
of pressure equipment.
6
Manual NFE-MVE
Example for occupational/professional group Example for qualification
Transportation, traffic, warehousing
Installation and building technology
Electrical engineering
Installation and building technology
in the technical association of technical
monitoring.
Specialist for transportation and warehousing
Specialist for heating installations. Person
instructed for the operating room with
knowledge from these instructions
Specialist for electrical installation.
Qualified person (QP) with approval by the
responsible energy utility company.
Qualified person (QP)