Cleaning and maintenance
Number of
Audio alarm
flashes
2
3
4
5
6
–
8
Cleaning and maintenance
!
WARNING! Electrocution hazard
Always disconnect the refrigerator from the mains before you clean and
service it.
A
NOTICE! Damage hazard
• Do not use abrasive cleaning agents or hard objects during cleaning
as these can damage the refrigerator.
• Never use hard or sharp tools to remove ice or to free objects frozen
onto the device.
• Do not use any mechanical tools or any other tools to speed up the
defrosting process.
➤ Clean the refrigerator regularly and as soon as it becomes dirty with a damp
cloth.
➤ Make sure that no water drips into the seals. This can damage the electronics.
➤ Wipe the refrigerator dry with a cloth after cleaning.
➤ Check the condensate drain regularly.
26
Fault type Fault
Yes
E
Yes
E
Yes
E
Yes
E
No
W
Yes
W
Outer fan overcurrent
Compressor does not start
Compressor overload
Thermal cut out compressor
controller unit
CI bus fault
Door open for more than
2 minutes
RCD10.5
Solution
➤ Press the on/off
button for at least
2 seconds.
➤ Press the on/off
button for at least
2 seconds.
➤ Press the on/off
button for at least
2 seconds.
➤ Press the on/off
button for at least
2 seconds.
Resets automatically
➤ Close the door.
EN