Connecting Interfaces; Ethernet Tcp/Ip Connection - Hbk Wtx110 Bedienungsanleitung

Fig. 4.13 Example of connection for current output 0/4 ... 20 mA
Fig. 4.14 Example of connection for voltage output 0/2 ... 10 V
4.7

Connecting interfaces

4.7.1

Ethernet TCP/IP connection

You can connect devices to a WTX110 with an Ethernet TCP/IP port via the M-12 socket
on the bottom of the device. See also section 6.3.3f from page 53 on configuring the
interface.
You can connect the WTX110 to a 10/100 Mbit Ethernet network, for example,
using one of the HBM connection cables:
S
1-KAB2129-5: Ethernet connector cable M12 connector to RJ45 connector
(straight, 5 m)
S
1-KAB2130-5: Ethernet connector cable M12 connector to RJ45 connector (90°, 5 m)
S
1-KAB2129-10: Ethernet connector cable M12 connector to RJ45 connector
(straight, 10 m)
S
1-KAB2130-10: Ethernet connector cable M12 connector to RJ45 connector
(90°, 10 m)
WTX110
INSTALLATION AND ELECTRICAL CONNECTION
KL3
KL3
500 ohms max.
500 ohms min.
31