Application Example Check, Checkweighing - HBK WTX110 Bedienungsanleitung

Display
WTX110 V#.#.#
1 General
1st switching point
2nd switching point
13.2

Application example Check, checkweighing

Key/Action
Weight too low (minus)
Key/Action
WTX110
OPERATING MODE Check
Key
Display
0.2 kg
0.0 Net/kg
Zeroing ...
55.2 Net/kg
o.k. +5.2 kg
55.2 Net/kg
Weighing ...
Display
37.2 Net/kg
minus -12.8 kg
37.2 Net/kg
Weighing ...
Explanation
Display of the current firmware version.
Press within 3 seconds to access Supervisor
Mode.
Press 7 times to go to the 1st switching point.
Enter maximum allowable negative deviation from
setpoint.
Enter maximum allowable positive deviation from
setpoint.
Explanation
Set the scale to zero.
Place an item on the scale.
Check OK means the weight is within
tolerance (between 45 kg and 60 kg in
the example).
Send the weight value to a printer/PC.
Explanation
Place an item on the scale.
Check NOT OK here means that the
weight is too low (in the example
below 45 kg).
Send the weight value to a printer/PC.
165