Status Messages - Metrohm 795 KFT Titrino Gebrauchsanweisung

3.1 General rules

3.1.3 Status messages

Go:
$G
Hold:
$H
Continue:
$C
Ready:
$R
Stop:
$S
Detailed status conditions
Status conditions of the global $G:
$G .Mode.KFT .Inac:
.Req .Id1:
.Start:
.KFT1:
.Cond.Ok:
.Cond.Prog:
$G .Assembly.Bur
Status conditions of the global $H:
Status conditions of the global $C:
Status conditions of the global $R:
$R .Mode.KFT.QuickMeas:
$R .Mode.KFT .Inac:
.Cond.Ok:
.Cond.Prog:
$R .Assembly.Bur.ModeDis:
48
In order to have an efficient control by an external control device, it must also
be possible to query status conditions; they provide information on the status
of the Titrino. The trigger $D initiates output of the status. Status messages
consist of the global status, the detailed status and eventual error messages,
e.g. $S.Mode.KFT;E26. The global status informs on the activity of the proc-
ess, while the detailed status conditions show the exact activity within the
process.
The following global status conditions are possible:
The Titrino is executing the last command.
The Titrino has been held ($H, key <meas/hold> or by an error which effects
the hold status).
The Titrino has been restarted actively after hold.
The Titrino has executed the last command and is ready.
A process has been aborted in an "unnatural manner". e.g. stopped or aborted
because there was an error.
Instrument at the beginning or at the end of a titration.
Instrument in the KFT mode, requesting Id1 after start.
Instrument in the KFT mode, requesting Id2 after start.
.Id2:
Instrument in the KFT mode, requesting Id3 after start.
.Id3:
Instrument in the KFT mode, requesting sample size after start.
.Smpl:
Instrument in the KFT mode, requesting unit of sample size after start.
.Unit:
Instrument in the KFT mode, processing the start conditions.
Instrument in the KFT mode, titrating to the first endpoint.
Instrument in the KFT, conditioning, endpoint reached (after the first
startup from the standby mode).
Instrument in the KFT mode, conditioning, endpoint not reached
(Conditioning progressing).
Buret in filling process
.Fill:
Buret in DIS mode
.ModeDis:
The status message of the action which has been held appears.
If the process is held because a monitored limit has been violated, its status
message is $H.Mode.KFT.Titr.
The status conditions of the global $C are identical with the ones of the global
status $G. They appear when the process has been restarted actively from the
status "Hold" ($C, key <meas/hold> or automatically after elimination of an
error).
Quick manual measurement from the initial status in mode KFT.
Instrument in the KFT mode, inactive.
Instrument in the KFT mode, conditioning, endpoint reached.
Instrument in the KFT mode, conditioning, endpoint not reached.
Buret in the DIS mode, inactive.
795 KFT Titrino