Dimmer Curves; System Info - Cameo Q SPOT 40 COLD WHITE Bedienungsanleitung

Factory Reset = reset to factory
settings
Menu ENTER
Settings
UP/DOWN

Dimmer curves

linear
DMX value
SYSTEM INFORMATION (System Info)
To read a variety of system information, press the MODE button repeatedly until "Menu DMX Addr" or "Menu Mode" appears in the display.
If necessary, select the menu item "Menu System Info" using the UP and DOWN keys and press ENTER. Use the UP and DOWN controls to
select the desired sub-menu item, and press ENTER to display the corresponding information.

System Info

Firmware = display the soft-
ware version
Temperature = display LED
temperature in
degrees Celsius or
Fahrenheit
Op.Hours = display operating
time in hours
8
Reset Now?
Settings ENTER Display Rev
Display Rev
UP/DOWN
/
Settings ENTER Display
Display
UP/DOWN
/
Settings ENTER Dim. Curve
Dim. Curve
UP/DOWN
/
Settings ENTER Dimmer Resp.
Dimmer Resp.
UP/DOWN
/
ENTER
Settings IR Remote
IR Remote
UP/DOWN
ENTER
/
Settings
Reset Now?
ENTER
Factory Reset
Yes = ENTER
No = Mode
exponential logarithmic
DMX value DMX value
V1.xx
Temperature LED
Temperature
C/F
xxxxh
ENTER = reset to factory setting
MODE = do not perform reset
Display Rev
/
On Off
ENTER ENTER
Display
/
On Off
ENTER ENTER
Dim. Curve
/
Linear Exp
ENTER ENTER
Dimmer Resp.
/
LED Halogen
ENTER ENTER
IR Remote
/
On Off
ENTER
S-curve
DMX value
Press ENTER to display information.
= display temperature by pressing ENTER
= select temperature unit to degrees Celsius or degrees Fahren-
heit. Confirm with ENTER
Press ENTER to display information.
Dim. Curve Dim. Curve
/ /
Log S-Curve
ENTER ENTER