Ordering Replacement Parts; Cleaning; Emptying Dust Collector And Cleaning Dust Fi Lter - Cleanmaxx SC861 Gebrauchsanleitung

4. Insert the power plug in a wall socket.
5. Set the On/Off switch to 1.
6. Move the suction opening or nozzle over the surface to be cleaned.
7. After fi nishing vacuuming, set the On/Off switch to 0 and unplug.
8. After use, always empty the dust collector and clean the dust fi lter.

Ordering Replacement Parts

You can obtain original spare parts and accessories via our website
www.service-shopping.de.

Cleaning

CAUTION
❐ Remove the power plug before cleaning and / or putting away.
❐ Do not use caustic or abrasive products to clean the housing or you may damage the surface.
❐ Never immerse the appliance in water.
Emptying dust collector and cleaning dust fi lter.
4. Then wash the dust fi lter under cold running water.
CAUTION: Do not wash the dust fi lter in the washing machine.
5. Leave the dust fi lter to dry in the air for 24 hours until completely dry before reinserting.
3. To quickly unwind the cable from the fl oor vacuum cleaner, twist
down the cord holder on the top handle.
1. Hold down the unlocking button for the dust collector and ca-
refully remove.
2. Hold the dust collector over a dustbin, carefully remove the
dust fi lter and empty the dust collector.
3. Bang the dust fi lter gently.
23