Assembly; Conversion From Handheld To Fl Oor Vacuum Cleaner; Accessories; Fitting And Removing Nozzles - Cleanmaxx SC861 Gebrauchsanleitung

Assembly

Conversion from handheld to fl oor vacuum cleaner
Remove all parts from the packaging and place carefully on a fl at area. If necessary, put protec-
tive sheeting underneath to avoid harm to easily damaged surfaces. Carefully remove all packing
materials. Compare the contents with the list of parts.
Using as a handheld vacuum cleaner
Using as a fl oor vacuum cleaner
Removing rod handle
4. Open the fl ap.
5. Pull out the rod handle.
6. Close the fl ap on the handle again.

Accessories

Fitting and removing nozzles

CAUTION
❐ Before changing nozzles, always switch the vacuum cleaner off fi rst.
• When fi tting nozzles, insert in the suction opening.
• To remove nozzles, pull out of the suction opening.
The 2 in 1 Vacuum Cleaner is ready for use as a handheld appli-
ance as soon as it has been unpacked.
1. Open the little fl ap on the handle of the handheld vacuum cleaner.
2. Insert the rod handle in the opening in the handle and push in as
far as it will go.
3. Press the fl ap against the adapter so that it snaps into place.
21