Adjust Telescopic Tube; Rotate Handle - TOOLCRAFT PSH-L0218-E Originalbetriebsanleitung

9.3 Adjust telescopic tube

1. Unlock the telescopic tube lock (14).
2. Pull out the telescopic tube (6) as far as this is necessary for the working height.
3. Lock the telescopic tube lock. If necessary, tighten the screw on the clamping device with a suitable hex key.

9.4 Rotate handle

To ensure an optimal working position, the handle (1) can be rotated 45 ° and 90 °.
1. Press the locking button (8) on the handle and set the desired angle.
2. Make sure that the handle is locked in one of the locking positions.
8
37