a) Attach the Nozzle
• Remove the battery to prevent an accidental start.
• Align the large opening of the nozzle (5) with the outlet port (1).
• Gently press together and rotate clockwise until the parts lock
together.
12. Operation
a) Power On/Off
• Press the power switch (9) to turn the power on and release to turn the power off.
- Press and hold the power button then press the power switch lock (8) to keep the power on.
- Press then release the power button to release the lock.
b) Adjust Vacuum/Blower Power
Adjust the vacuum/blower power by adjusting the power setting dial (7), 1 = low and 7 = high.
c) LED light
Press the LED light button
13. Troubleshooting
Problem
Insufficient vacuum
force to extract debris.
14. Care and Cleaning
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can cause
damage to the housing and malfunctioning.
• Turn the power off and remove the battery before each cleaning.
• Clean the product with a dry, fibre-free cloth.
24
(2) to turn the lights on or off.
Cause
The dust bag is full or clogged.
Suggestion
Remove the battery, then empty the dust bag
and check for any blockages.