Planika KL21 Rio Montage- Und Bedienungsanleitung Seite 9

Disconnection of the gas cylinder
Twist-on connection
1.
Turn off the Rio -– put it into the OFF position. The main and pilot burner need to be turned off.
2. Turn the bottle valve into the OFF position
(clockwise).
3. NEVER DO NOT unmount the regulator (or
connecting nut) when the bottle valve is open.
4. TAKE OFF the regulator (or the connecting nut) with
the use of a wrench or a connecting knob.
5.
REPLACE the linkage closer or cap on the empty or
partially full bottle if it's not being used.
Quick-release
2. Turn the switch into the OFF position.
3. Take off the quick-release regulator by pressing the
switch horizontally and simultaneously pulling the
whole regulator upwards.
4.
REPLACE the tightening cap on an empty or partially
full bottle if it's not being used.
9