Operating Instructions; General Notes; Start-Up Of The Device - Planika Kl21 Rio Montage- Und Bedienungsanleitung

4. OPERATING INSTRUCTIONS

4.1. General Notes

The Rio fireplace has a control valve with a built-in ignition for the main burner (without pilot flame). The flame height
of the main burner may be appropriately regulated with by turning the knob. Next to the knob is placed elective
ignition button (powered by AAA battery). The control panel is placed on one of the shorter sides of the base of the
fireplace.

4.2 Start-up of the device

•
Make sure that the knob is placed in „OFF" position (all the way clockwise).
•
Open the valve on gas cylinder.
•
Press the knob and while still pressing turn it counter-clockwise from position (1) to position (2)
Fig. 5
– Control knob
Fig. 6
– Off position
Fig. 7
– Turning the device on
11