1. General information
Supplementary documentation:
▶
Please follow all the documentation included within the scope of delivery.
EN
1. General information
The instrument described in the operating instructions has been designed and
■
manufactured using state-of-the-art technology. All components are subject
to stringent quality and environmental criteria during production. Our manage-
ment systems are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on handling the
■
instrument. Working safely requires that all safety instructions and work inst-
ructions are observed.
Observe the relevant local accident prevention regulations and general safety
■
regulations for the instrument's range of use.
The operating instructions are part of the product and must be kept in the
■
immediate vicinity of the instrument and readily accessible to skilled personnel
at any time.
Skilled personnel must have carefully read and understood the operating inst-
■
ructions prior to beginning any work.
The manufacturer's liability is void in the case of any damage caused by using
■
the product contrary to its intended use, non-compliance with these operating
instructions, assignment of insufficiently qualified skilled personnel or unautho-
rised modifications to the instrument.
The general terms and conditions contained in the sales documentation shall
■
apply.
Subject to technical modifications.
■
Further information:
■
- Internet address:
Model
DPG40
DPS40
DPGS40
4
With versions for hazardous areas, also follow the additional
operating instructions!
Data sheet Additional operating instructions for Ex version
PM 07.20
14525200
PV 27.21
14110818
PV 27.20
14110818
WIKA operating instructions DELTA-plus, DELTA-comb and DELTA-switch
www.wika.de / www.wika.com