Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning The Oven Door - hanseatic 7NM30T0-E111E00 Gebrauchsanleitung

Einbau-backofen
Vorschau ausblenden Andere Handbücher für 7NM30T0-E111E00:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Page EN-20
Cleaning the oven
3. Clean the baking tray guides using warm
water and mild dish soap or all-purpose
cleaner. Then dry everything off.
Remove the baking tray guides when
you need more space in the oven, for
example.
Inserting the baking tray guides
1. Position the baking tray guides (15) so
that both hooks with the welded plates
are at the front.
2. First, push the rear hooks into the holes
provided in the side walls.
3. Then push the front hooks into the holes
provided in the side walls.
You can then continue to use the baking tray
guides as usual.

Cleaning the oven door

NOTICE
Risk of breakage and injury!
The oven door is equipped with heavy
glass panels that can break if handled
improperly. The glass shards are sharp
and can cause injury.
■ Do not let the oven door or individual
glass panels fall.
■ Do not hit the oven door and the indi-
vidual panels of glass anywhere.
■ Do not use the oven when the glass
is damaged because the oven is no
longer safe. Please contact our Service
department instead (see page EN-28).
■ If a glass pane breaks, keep children
away from it and carefully collect all
the pieces of glass.
Removing the oven door from its hinges
The oven door can be removed from its
hinges to enable easy cleaning of all areas
of the oven:
1. Open the oven door completely.
2. Fold the clips (19) on both sides all the way
forward. Use a screwdriver if necessary.
3. Close the door only as far as the clips al-
low easily.
4. Lightly lift and guide the door forward out
of its hinges.
Replacing the oven door on its hinges
1. Hold the oven door at an angle using both
hands.
2. Hook the hinges into the holes in the side
panels.
3. Open the oven door completely.
4. Fold the clips (19) on both sides all the
way back.
5. Close the door carefully. The door must
sit flush when closed. If the door does not
sit flush when closed or if there is a crack-
ing sound when closing it, the door is not
hung properly.
6. Correct the position of the hinges and
clips, if necessary, until the door opens
and closes smoothly again.
(19)
(19)

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

2151 7334

Inhaltsverzeichnis