General Application Instructions - HBK HBM U9C Montageanleitung

4

GENERAL APPLICATION INSTRUCTIONS

The force transducers are suitable for measuring tensile and compressive forces. They
provide highly accurate static and dynamic force measurements and must therefore be
handled very carefully. Particular care must be taken during transportation and installa­
tion. Dropping and knocking the transducer may cause permanent damage.
The U9C series force transducers have two external threads into which the forces to be
measured must be applied.
The Specifications section 10 on page 29 lists the permissible limits for mechanical, ther­
mal and electrical loading. It is essential to observe these limits when planning the mea­
suring set-up, during installation and, ultimately, during operation.
U9C
10
GENERAL APPLICATION INSTRUCTIONS