Minimum Distances - hanseatic 65C90C7-E11B000 Gebrauchsanleitung

Page EN-30 Fitting and installation

Minimum distances

➊
➍
➌
➏ ➏
➐ ➐
➌ ➌ ➌
➎ ➎ ➎ ➎
The following minimum distances must be
observed:
➊
Distance between hob and wall unit/
extractor unit: ≥760 mm
➋
If the hob is installed over an oven
with ventilation, the clearance
between the base of the appliance
and the cover of the oven must be
≥50 mm.
➌
The hob must be positioned in
such a way that the air outlet is not
compromised.
➍
The hob must be positioned in
such a way that the air outlet is not
compromised.
➎
Worktop thickness: 38–48 mm
➏
Worktop depth: ≥600 mm
➐
The hob must be surrounded on all
sides by worktop of at least: ≥50 mm
– If the hob is separated from the rest of the
mounting cupboard using a horizontal fix-
ing plate, the space between the base of
the appliance and the fixing plate must be
≥50 mm high.
– If the hob is separated from the rest of the
mounting cupboard using a vertical fixing
plate, the space between the wall and the
fixing plate must be ≥20 mm wide. At the
back of the fixing plate, a square opening
with a side diameter of at least 80 mm must
be cut out.