SPORTSTECH sBike Benutzerhandbuch Seite 29

6.4 MOUNTING THE PEDALS
65L
• Identify the left pedal. It is marked with an 'L'.
• Put it on the left pedal crank.
• Use your fingers to turn the thread of the left pedal into the threaded hole of the pedal crank. Note that
the left pedal has a left thread: when viewed from the side, turn it in to the left.
• Tighten the pedal to the left using the open-end wrench.
• Repeat the steps for the right pedal. It is marked with an 'R'.
• But note that the right pedal has a right thread: to tighten it, it must always be turned to the right.
65L
Cr
Cr
#122 1X
13
50
65R
EN DE
15
29