Connecting The Nurse Call System And Remote Alarm Box - Lowenstein Medical prisma CHECK Gebrauchsanweisung

Result
4.4 Connecting the nurse call system and
4.4.1 Connecting the remote alarm box VENTIremote
Requirement
4.4.2 Forwarding alarms
38 EN prisma CHECK
The pulse oximetry sensor is connected. The display shows the
current oxygen saturation and pulse rate values.
The value under SpO
under PR displays the pulse rate in pulse beats per minute. If the
values cannot be determined (e.g. because the sensor has not yet
been connected or if lack of signal quality makes the values
unreliable), - is displayed instead of the values.
remote alarm box
Connect the prisma VENT to the nurse call system of a hospital or
to the remote alarm box VENTIremote alarm via the remote alarm
connection of the prisma CHECK module.
alarm
The module is connected to a prisma VENT therapy device.
1. Connect the plug of the connection line to the remote alarm
interface.
2. Connect the connection line to the remote alarm box
VENTIremote alarm or the nurse call system. When doing so,
observe the instructions for use for the remote alarm box or the
nurse call system connection line.
All alarms are switched in parallel to a remote alarm connection.
displays the SpO
2 2
value in %. The value