Preparation And Operation; Connecting Up The Prismapsg Module - Lowenstein Medical prismaPSG Gebrauchsanweisung

4 Preparation and operation

4 Preparation and operation

4.1 Connecting up the prismaPSG module

Requirement
30 EN prismaPSG
The module prismaPSG (type WM 100 MP) is connected to the
prismaCONNECT module of the type WM 100 MC or the prisma
HUB module (WM 090 MC).
Only connect up the therapy devices and modules permitted in
accordance with these instructions for use. Only medically
approved PSG systems may be connected up to the prismaPSG
module.
• The device is switched on or off (see instructions for use for the
therapy device).
• The prismaCONNECT or prisma HUB module is connected up
to the therapy device (see instructions for use for the
prismaCONNECT or prisma HUB module).
1. Plug the connector of the supplied PSG connection cable into
the PSG connection on the prismaPSG module.