Cleaning, Checks And Storage/ Troubleshooting - Christopeit Sport RMT 8200 Montage- Und Bedienungsanleitung

CLEANING, CHECKS AND STORAGE
1. Cleaning
Use only a less wet cloth for cleaning. Caution: Never use benzene, thinner or other aggressive cleaning agents for surface cleaning as this dam-
age caused. The device is only for private home use and for use suitable indoors. Keep the unit clean and moisture from the device.
2. Storage
Remove the batteries from the computer while intending the unit for more than 4 weeks not to use. Fold up the seat frame and secure with lock-
ing pin. Choose a dry storage in-house and spray some oil to the thread of the handlebar bolt for fold up function. Cover the bike to protect it
from being discolor by any sunlight and dirty through dust.
3. Checks
We recommend every 50 hours to review the screw connections for tightness, which were prepared in the assembly. Every 100 operating hours,
you should spray some oil at the thread of the handlebar bolts for fold up function.
TROUBLESHOOTING
Problem
Computer has no value at Display if
you press any key.
Computer is not counting data and
do not switch on after start cycling.
If you cannot solve the problem with the following information, please contact the authorized service center.
Training area in mm
(for home trainer and user)
Possible Cause
No power adapter is well plugged
or wall power is without power.
Sensor impulse missing base on
not well plugged connection
19
Solution
Check that the power adapter is properly plugged in, possibly
with another electric device check if the wall power is fine.
Check the plug connections at computer and under the fold
up constrcution.
Free area in mm
(Training area and security area
(rotating 60cm))
GB