Technical Data; Unpacking; Before Commissioning - Scheppach HP2500S Original Bedienungsanleitung

6. Technical data

Motor / Engine
Displacement
Motor power
Tank volume
Working plate size (LxW)
Compaction pressure
Travel speed
Vibration strokes
Compaction depth
Max. permissible angle of
the motor
Weight
Subject to technical modifications!
Noise and vibration
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB (A), please
wear suitable hearing protection.
Noise characteristic values
Sound power level L
WA
(EN ISO 3744)
Sound pressure level L
pA
(EN ISO 11201)
Uncertainty K
wa/pA
Vibration characteristics
Vibration a
h
Note: The indicated sound levels have been deter-
mined according to a standardized testing procedure
and can be used to compare different tools with each
other. Furthermore, these values are suitable to eval-
uate the loads that sounds can cause for the user in
advance.
1-cylinder 4-stroke
OHV Motor
196 cm³
4,8 kW / 6,5 HP
3,5 l
630 x 400 mm
30 kN
25 m/min
4300 1/min
40 cm
20°
125 kg
103,47 dB(A)
83,47 dB(A)
2,72 dB(A)
30 m/s²
www.scheppach.com
Attention! Depending on how you will use the tool, the
actual values may deviate from the indicated values.
Take measures to protect yourself from noise pollution.
In this process it is important to take the complete se-
quence of operation into account. This also includes
moments during which the power tool operates without
load and moments during which it is turned off. Suita-
ble measures comprise amongst other things regular
maintenance and service of the tool and the insertion
tools, regular breaks and the appropriate planning of
the sequences of operation.
7.

Unpacking

• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the pack-
aging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
• If possible, store the packaging until the warranty
period has expired.
• Familiarise yourself with the product by means of the
operating instructions before using for the first time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Replace-
ment parts can be obtained from your dealer.
• When ordering please provide our article number as
well as type and year of manufacture for your equip-
ment.
m ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swal-
lowing and suffocation!

8. Before commissioning

m ATTENTION!
Always make sure the device is fully assembled
before start-up!
Wheel kit (fig. B + C)
To manually change the position of the plate compac-
tor, it can be equipped with the enclosed wheel kit.
GB | 29