Technical Data; After-Sales / Service - AL-KO CSM 1815 Originalbetriebsanleitung

Technical data

12 TECHNICAL DATA
Chain saw
Art. No.
Set with battery pruner saw, 2,5 Ah rechargeable battery and charger
Dimensions (L x W x H)
Gross weight with chain and chain bar (without battery)
Net weight without chain and chain bar (without battery)
Chain oil tank volume
Cutting length
Overload protection
Motor power consumption
Motor speed
Sound power level L
Sound pressure level L
Vibration value (DIN EN 28662-1)*
Saw chain:
■
Saw chain type
■
Spare part number for saw chain
■
Drive link thickness
■
Max. working speed of the saw chain
Chain bar:
■
Spare part number for chain bar
■
Length of the chain bar
x: included, -: not included
* Notes:
■
The vibration emission value given has been
measured according to a standardised test
method and can be used to compare one
power tool with another.
■
The vibration emission value can also be
used for an initial assessment of the expo-
sure (vibration exposure degree).
■
The vibration emission value may differ from
the given value during actual use of the pow-
er tool, depending on how the power tool is
used.
■
Try to keep the vibration load as low as pos-
sible. Exemplary measures to reduce vibra-
tion are the wearing of gloves when using the
tool and the limitation of working time. All
443553_a
(DIN EN ISO 3744)
WA
pA
parts of the operating cycle must be taken in-
to account (e.g. times when the power tool is
switched off and those in which it is switched
on but runs without load).

13 AFTER-SALES / SERVICE

In the event of questions of warranty, repair or
spare parts, please contact your nearest AL-
KO Service Centre. These can be found on the
Internet at:
www.alko-garden.com/service-contacts
Further information on spare parts can be found
at:
www.alko-garden.com/spareparts
CSM 1815
114016
114023
430 x 200 x 85 mm
1.56 kg
1.28 kg
30 ml
6'' / 152 mm
x
500 W
18500 minˉ¹
93 dB(A)
78 dB(A)
2.8 m/s²
0.3"
114024
1.1
7 m/s
114025
7" / 179.5 mm
43