Operating Signs; Product Overview (01); Scope Of Supply; Safety Instructions - AL-KO CSM 1815 Originalbetriebsanleitung

GB
Symbol Meaning
2.5.2

Operating signs

Symbol Meaning
Press the push-button to oil
the saw chain.
Note the running direction
of the saw chain!
Saw chain running direction
(under cover for chain
sprocket)
2.6

Product overview (01)

No. Component
1 Rear handle (hand area is marked)
2 Locking button
3 ON/OFF switch
4 Front handle
5 Cap of the chain oil tank
6 Viewing aperture of the chain oil tank
7 Folding chain cover
8 Chain tensioning screw
9 Sprocket cover
10 Fastening ring for sprocket cover
11 Chain bar
12 Saw chain
13 Stop
14 Hand guard
15 Charge status indicator and warning
sign
16 Push-button to oil the saw chain
17 Philips and slotted angled screwdriver
18 Battery slot
19* Rechargeable battery*
30
No. Component
20* Charger*
21 Transport case
22 Operating instructions
The set (Art. No. 114023) includes a 2,5 Ah re-
chargeable battery and charger. The scope of
supply of the appliance alone (Art. No. 114016)
does not include the rechargeable battery and
charger. See technical data on pages 6 and 7
and see chapter 12 "Technical data", page 43.
2.7

Scope of supply

NOTE Rechargeable battery and charger
are not included. However, they are part of the
complete set or are available individually.
The items listed here are included in the standard
scope of supply. Check that all items are present:
No. Component
1 Battery pruner saw
2 Transport case
3 Operating instructions
4 30 ml saw chain oil, biologically degrad-
able

3 SAFETY INSTRUCTIONS

3.1

General Power Tool Safety Warnings

WARNING! Read all safety warnings, in-
structions, illustrations and specifications
provided with this power tool. Failure to follow
all instructions listed below may result in electric
shock, fire and/or serious injury.
■
Save all warnings and instructions for fu-
ture reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
3.1.1

Work area safety

■
Keep work area clean and well lit. Clut-
tered or dark areas invite accidents.
■
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
Safety instructions
CSM 1815