Product Description - Stiga ST 266 HW Gebrauchsanweisung

disposal facility in accordance with the local regula-
tions in force.
2.

PRODUCT DESCRIPTION

This machine is a snowplough.
The machine is equipped with a snow clearing auger,
protected by a cover, which sends the snow into a
discharge chute. The auger is driven by the engine, which
also provides traction to the machine.
The machine is operated using the controls on the
dashboard.
The operator can operate the machine and use the main
controls, always standing at the operator's position,
behind the machine.
Intended use and improper use
This machine is designed and built for snow clearing,
removal and ejection from side-walks, gardens, driveways
and other surfaces at ground level.
The snowplough must be used exclusively for snow
removal.
Any other use that does not comply with the above,
can be dangerous and cause damage to people and/or
property. Examples of improper use may include, but are
not limited to:
• Using the machine on surfaces above the ground
level, such as building roofs, garages, porches or
other structures or buildings.
• Operating the auger when there are elements different
from snow (for example, soil, grass, pebbles, etc.).
• Towing or pushing loads.
• Transporting children or other passengers.
IMPORTANT Improper use of the machine will invalidate
the warranty, relieve the Manufacturer from all liability, and
the user will consequently be liable for all and any damage or
injury to himself or others.
This machine is intended for use by consumers, i.e.
non-professional operators. The machine is intended for
"DIY" use only.
IMPORTANT The machine must be used by one operator.
2.1. SAFETY SIGNS
WARNING!
Read the instructions before
using the machine.
Wear hearing protection and protective
goggles
DANGER! Keep your hands and feet
away from the rotating parts.
DANGER! Ejected objects. Do not direct
the ejection outlet toward bystanders or
animals.
DANGER! Rotating rotor. Always keep
away from the snow discharge opening
DANGER! Keep people, children and
animals away from the work area
WARNING! Remove the key and read
the instructions before carrying out any
maintenance or repair work
DANGER! It is prohibited to insert the
hands inside the discharge chute when
the auger is moving. Switch off the engine
before unclogging the discharge chute
DANGER! Keep away from hot surfaces.
DANGER!
monoxide. DO NOT start the machine in
enclosed areas.
DANGER! The fuel is highly flammable
and explosive. Remove the ignition key
and let the engine cool down before
refuelling
DANGER! Danger of fire or explosion.
Do not smoke, do not use open flames or
ignition sources
IMPORTANT Damaged or illegible labels must be re-
placed.. Order replacement decals from an authorised
service centre.
2.2. MACHINE COMPONENTS
A) Chassis
B) Dashboard
C) Engine
D) Fuel tank
E) Plug for electrical starting
F) Manual starting grip
G) Deflector
H) Discharge chute
I) Paddle
J) Auger protective cover
K) Auger
L) Levelling shoes
M) Headlights
N) Wheels/Tracks
3. ASSEMBLY
IMPORTANT Unpacking and assembly must be car-
ried out on a flat, solid surface with sufficient space to
move the machine and the packaging.
The machine is supplied assembled.
he machine is supplied without engine
T
IMPORTANT
oil or fuel.
EN - 3
.
.
Engines emit carbon
(Fig. 2)
.
.