Residual Risks; Technical Data; Unpacking - Scheppach 5910305967 Original Bedienungsanleitung

Information on the charging unit and charging pro-
cess
• Please observe the operating manual for the charg-
ing unit.

6. Residual risks

The machine has been built according to the state-of-
the-art and the recognised technical safety require-
ments. However, individual residual risks can arise
during operation.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re-
main.
• Residual risks can be minimised if the "Safety In-
structions" and the "Intended Use" together with the
operating manual as a whole are observed.
• Avoid accidental starting of the machine: the operating
button may not be pressed when inserting the plug in
an outlet. Use the tool attachment that is recommend-
ed in this operating manual. This is how to ensure that
your machine provides optimum performance.
• Keep your hands away from the working area when
the machine is in operation.
The following hazards may arise in connection with the
design and construction of this power tool:
• Cuts
• Hearing damage if suitable hearing protection is not
worn.
• Damage to health resulting from hand/arm vibration
if the device is used over an extended period of time
or if it is not properly operated and maintained.
7.

Technical data

Motor voltage
Engine output
Type of guide bar (pre-fitted)
Type of saw chain (pre-fitted)
Tank for chain lubricating oil
Max. cutting speed
Chain pitch
36 | GB
Driving link thickness
Chain wheel tooth pitch
Protection class
Weight unfuelled, without cutting
gear approx.
Weight unfuelled, with cutting
gear approx.
Technical changes reserved!
Noise and vibration
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB (A), please
wear suitable hearing protection.
Noise data
Sound power level L
Sound pressure level L
Uncertainty K
Vibration parameters
Vibration a
Uncertainty K

8. Unpacking

• Open the packaging and carefully remove the prod-
• Remove the packaging material, as well as the pack-
• Check whether the scope of delivery is complete.
• Check the product and accessory parts for transport
• If possible, keep the packaging until the expiry of the
• Familiarise yourself with the product by means of the
• With accessories as well as wearing parts and re-
20 V DC
0.4 W
ROYAL 4"
• When ordering please provide our article number as
CLQ4328
ROYAL 4" DG04-
28-43P
m WARNING!
ca. 40 cm³ (40
The device and the packaging material are not
ml)
children's toys! Do not let children play with plas-
7.5 m/s
tic bags, films or small parts! There is a danger of
1/4"/1,1mm
choking or suffocating!
www.scheppach.com
WA
pA
wa/pA
h
h
uct.
aging and transport safety devices (if present).
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
warranty period.
operating manual before using for the first time.
placement parts use only original parts. Replace-
ment parts can be obtained from your dealer.
well as type and year of manufacture for the product.
0,043
1/4" / 6
II
1.0 kg
1.13 kg
96,2dB(A)
89,6dB(A)
3dB(A)
4,43m/s
2
1,5