Technical Data - Husqvarna 240i Bedienungsanweisung

• Attach the product safely during transportation.
Disposal of the battery, battery charger
and product
The symbol below means that the product is not
domestic waste. Recycle it at a recycling station
for electrical and electronic equipment. This helps to
prevent damage to the environment and to persons.
Speak to local authorities, domestic waste service or
your dealer for more information.
(Fig. 24)

Technical data

Motor
Type
Features
Low energy mode
Lubrication system
Type of oil pump
3
Oil tank capacity, ml/cm
Weight
Chainsaw without battery, guide bar, saw chain and empty chain oil tank, kg
1
Noise emissions
Sound power level, measured dB(A)
Sound power level, guaranteed L
2
Sound levels
Sound pressure level at the operator's ear, measured according to EN
62841-1
3
Vibration levels
2
Front handle m/s
2
Rear handle m/s
1
Noise emissions in the environment measured as sound power (L
2000/14/EC and EN ISO 22868, has a typical statistical dispersion (standard deviation) of 3 dB (A).
2
Reported data for sound pressure level for the machine has a typical statistical dispersion (standard deviation)
of 3 dB (A).
3
Vibration level, according to EN 62841-4-1. Reported data for vibration level has a typical statistical dispersion
(standard deviation) of ± 1.5 m/s
a bar length and recommended chain type. If the machine is fitted with a different bar length, the vibration
level may vary by max ± 1.5 m/s
40
Note:
the product.
Technical data
dB(A)
WA
2
. Declared vibration data from measurements when the machine is fitted with
2
.
The symbol shows on the product or package of
240i
BLDC (brushless) 36V
SavE
Automatic
0.2/200
3.5
99
102
91
2.6
3.7
) in conformity with EC directive
WA
1951 - 001 - 23.09.2022