HBM PW37P Montageanleitung Seite 7

Safety instructions
cell can also cause damage to property or injury to persons in the vicinity of the
load cell.
If load cells are not used according to their designated use, or if the safety
instructions or specifications in the mounting and operating manual are
ignored, it is also possible that the load cells may fail or malfunction, with the
result that persons or property may be affected (due to the loads acting on or
being monitored by the load cells).
The scope of supply and performance of the transducer covers only a small
area of weighing technology, as measurements with (resistive) strain gage
sensors presuppose the use of electronic signal conditioning. In addition,
equipment planners, installers and operators should plan, implement and
respond to the safety engineering considerations of the weighing technology in
such a way as to minimize residual dangers. Comply with pertinent national
and local regulations.
Conversions and modifications
The design or safety engineering of the transducer must not be modified with­
out our express permission. Any modification shall exclude all liability on our
part for any damage resulting therefrom.
Maintenance
The PW37... load cells are maintenance free.
Resale
If the load cell is resold, these mounting instructions must be included with the
load cell.
PW37P 5
A04856_03_Y00_00 HBM: public