Inhaltsverzeichnis
Werbung
1.2
Searching for devices to configure
√ Connect the Touch module to the computer (see page 23 and 24) and
open ViP Manager
In Options (1)/Local connections (2) select the correct network interface (3)
in accordance with the method used to connect the computer and the touch
module (Micro-USB, LAN, Bluetooth). Confirm by clicking OK (4).
Click Scan system (5) to start searching for devices.
Remote NDIS
based Internet
Sharing Device
Micro-
USB
Ethernet card
LAN
Bluetooth Device
(Personal Area
Bluetooth
network)
1.3
Entering names in the directory
1. Select Directories/Name directory
2. Enter the information required (at least one "Call address" and one
"Name" need to be filled out for each contact)
3. Click "Write page" to send the data to the Touch module
1.4
Changing the call layout
Name directory
Custom direct
call
LOCK-RELEASE
LOCK-RELEASE
LOCK-RELEASE
LOCK-RELEASE
Antonio Rossi
Hans Schneider
7 2
Lisa Parker
Mik Parker
2
3
1
Lisa Rossi
4
5
6
Marco Bianchi
7
8
9
0
Lisa Schneider
Carlo Motta
John Lee
1. Select Layout/Settings
2. Select the "Layout type" from the drop-down menu
3. Click "Write page"to send the new configuration to the Touch module
If the selected layout is "name directory" and the number
of users stored is between 1 and 6, the size of the call
buttons will automatically adapt to the screen size
Call
Name
address
1
Antonio Rossi
Search by name
Dual-button
name directory
LOCK-RELEASE
LOCK-RELEASE
LOCK-RELEASE
LOCK-RELEASE
Search
Search name
Antonio Rossi
Andy
Lisa Schneider
Hans Schneider
Carlo Motta
Lisa Parker
Marco Bianchi
Mik Parker
Lisa Rossi
Lisa Rossi
Marco Bianchi
Marco Bianchi
1
2
3
4
5
6
7
8
9
0
Lisa Schneider
Lisa Schneider
Carlo Motta
Carlo Motta
Q
W
E
R
T
Y
U
I
O
P
A
S
D
F
G
H
J
K
L
John Lee
John Lee
#_*
Z
X
C
V
B
N
M
1.5
Restoring the micro-SD card configuration
The micro-SD card provided can be used to save all the settings and logs for
Touch module art. 3455U.
This data is updated once a day.
If the module is replaced, these settings can be copied to a new Touch module
as follows:
1. Remove the micro-SD card from the Touch module being replaced
2. Insert it into the computer using the special adapter provided
3. Connect the new Touch module to the computer and connect to the latter
using a USB/micro-USB cable and the ViP Manager software
4. Search for the device to configure as described on page 25
5. Use the mouse to right-click on the Touch module
6. Select "Restore configuration"
7. Select the restore file on the micro-SD card:
backup/XX-XX-XX_bkp.tar.gz
8. Remove the micro-SD card from the computer
25
Werbung
Inhaltsverzeichnis
