Proper Use; General Safety Information - Scheppach HC550TC 400V Original Bedienungsanleitung

• Assembly material
• Transport handle
• Oil bottle
• Operating manual

4. Proper use

The compressor is used to generate compressed air
for pneumatically powered tools that can be operated
with an air rate of up to 350 l/min. (e.g. tyre inflaters, air
blow guns, paint spray guns).
The compressor may only be operated in a dry and well
ventilated indoor space.
The machine may only be used in the intended manner.
Any use beyond this is improper. The user/operator,
not the manufacturer, is responsible for damages or
injuries of any type resulting from this.
An element of the intended use is also the observance
of the safety instructions, as well as the assembly
instructions and operating information in the operating
manual.
Persons who operate and maintain the machine must
be familiar with it and must be informed about potential
dangers.
In addition, the applicable accident prevention
regulations must be strictly observed.
Other general occupational health and safety-related
rules and regulations must be observed.
The liability of the manufacturer and resulting damages
are excluded in the event of modifications of the
machine.
The machine may only be operated with original parts
and original accessories from the manufacturer.
The safety, operating and maintenance specifications
of the manufacturer, as well as the dimensions
specified in the technical data, must be observed.
Please observe that our equipment was not designed
with the intention of use for commercial or industrial
purposes. We assume no guarantee if the equipment
is used in commercial or industrial applications, or for
equivalent work.

5. General safety information

m Attention!
The following basic safety measures must be observed
when using power tools for protection against electric
shock, and the risk of injury and fire. Read all these
notices before using the power tool and store the safety
instructions well for later reference.
Safe work
1. Keep the work area orderly
- Disorder in the work area can lead to accidents.
2. Take environmental influences into account
- Do not expose power tools to rain.
- Do not use power tools in a damp or wet
environment. There is a risk of electric shock!
- Make sure that the work area is well-illuminated.
- Do not use power tools where there is a risk of
fire or explosion.
3. Protect yourself from electric shock
- Avoid physical contact with earthed parts (e. g.
pipes, radiators, electric ranges, cooling units).
4. Keep away from children!
- Do not allow other persons to touch the
equipment or cable, keep them away from your
work area.
5. Securely store unused electric tools
- Unused power tools should be stored in a dry,
elevated or closed location out of the reach of
children.
6. Do not overload your power tool
- They work better and more safely in the
specified output range.
7. Dress properly
- Do not wear wide clothing or jewellery, which
can become entangled in moving parts.
- Rubber gloves and anti-slip footwear are
recommended when working outdoors.
- Tie long hair back in a hair net.
8. Do not use the cable for purposes for which it is
not intended
- Do not use the cable to pull the plug out of the
outlet. Protect the cable from heat, oil and sharp
edges.
9. Take care of your tools
- Keep your compressor clean in order to work
well and safely.
- Follow the maintenance instructions.
- Check the connection cable of the power tool
regularly and have it replaced by a recognised
specialist when damaged.
www.scheppach.com GB | 23