Assembly And Installation; Safety - FLUX F 570 Originalbetriebsanleitung

Assembly and installation

Assembly includes the connection between the progressive cavity pump and the motor as
well as the installation in peripherals.
6.1

Safety

DANGER
Explosion and fire hazard
Risk of death from explosions and fires when working in potentially explosive atmos-
pheres.
 Read chapter 2.4 Working in potentially explosive atmospheres.
DANGER
Vapours hazardous to health
Depending on the pumped medium, there is a risk of death due to hazardous gases.
 Use respiratory protection.
 Use eye protection.
WARNING
Falling loads
Due to the weight of the machine, unexpected load reactions may occur when it is lifted for posi-
tioning with the consequence of serious personal injury.
 Do not stand or walk under suspended loads.
 The following personal protective equipment must be used:
o Hand protection
o Protective footwear
o Head protection
 The work may only be carried out by qualified and authorised assembly personnel.
 Observe assembly drawings and associated technical data.
 Make sure that the components are properly secured to their base.
 Check all screw connections for secure fitting.
94
Assembly and installation
Operating instructions VISCOPOWER