Troubleshooting - FLUX F 570 Originalbetriebsanleitung

Help with faults
WARNING
Free-running drive shaft
Risk of drawing in and injury due to free-running drive shaft of the motor.
 Do not operate the motor without the progressive cavity pump!
 Only switch on the machine if it has been properly installed in the peripherals.
WARNING
Unpredictable start-up of the motor
Risk of injury due to medium spraying out.
 Secure the motor against unintentional start-up.
 Use eye protection.
 The following personal protective equipment must be used:
o Hand protection
o Protective footwear
o Eye protection
o Hearing protection (depending on emission sound pressure)
o Respiratory protection (depending on the pumped medium)
 Troubleshooting may only be carried out by trained personnel.
9.2

Troubleshooting

The following table lists possible faults, their cause and suggestions for troubleshooting.
If a fault occurs, proceed as follows:
Check if the fault is listed in the following table.

Follow the instructions in the Measure column

NOTICE
For the measures, the machine usually needs to be disassembled. See chapter 10 Disassembly
and cleaning.
Operating instructions VISCOPOWER 109