Technical Data; Marking; Type Code - FLUX F 570 Originalbetriebsanleitung

Technical data

Technical data
Each progressive cavity pump can be operated with different motors. There are different
kinds of motors available. The components of the progressive cavity pumps can be freely
configured. In potentially explosive atmospheres, the used components and motors have
been tested and approved in accordance with the ATEX directive. Different designs, compo-
nents and motors are taken into account in the technical data.
3.1

Marking

3.1.1 Type code

The type code is composed as follows:
Position and meaning
1: Type
2: Application
(Hygiene/FOOD Certificates)
3: Explosion prevention
4: Immersion depth of pump
tube
5: Mechanical seal
6: Seal (O-rings)
7: Suction nozzle
8: Shaft
Operating instructions VISCOPOWER
Type code
F 570
F 580
Food
3 A
Ex
400
700
1000
1200
1500
FKMo
FKMc
FFKMc
FKM
FFKM
NBR
CP
SP
ISP
TS
CS
Explanation
Gearbox version (commutator
motors, air motors, special
asynchronous motors)
Motor flange version (asyn-
chronous motors, air motors)
Application in the food sector
(compliant with EC 1935/2004
and FDA CFR 21)
Special 3-A approval for
food/hygiene (compliant with
EC 1935/2004 and FDA CFR
21)
Empty: Industrial application
With Ex approval
Empty: No protection
[mm]
[mm]
[mm]
[mm]
[mm]
Mechanical seal open FKM
Mechanical seal closed FKM
Mechanical seal closed FFKM
Material: FKM
Material: FFKM
Material: NBR
Clamp connection
Standard suction protection
Inliner suction protection
Torsion shaft
Joint shaft
79