Prepare Measurement - Beurer BM 19 Gebrauchsanweisung

Icons in the display:
1. "Change battery" icon
2. Error icon
3. Systolic pressure
4. Cardiac arrhythmia icon
5. mmHg unit
6. Icon for users 1, 2
7. Diastolic pressure
8. Time and date
9. Number of memory space
10. Pulse icon
11. Measured pulse
12. WHO - classification
1
2
4
5
6
12
8 9 10

4. Prepare measurement

Inserting battery
• Remove the battery cover from
• Insert four AA 1.5 V alkaline
• Replace the battery cover carefully.
If the battery change
measure ment is no longer possible and you must replace all
the batteries. Once batteries have been removed from the
device, the time must be reset. The stored measured values
3
are last.
Used batteries do not belong in the household waste. You are
legally obliged to dispose of the batteries. Dispose of them via
7
your specialist electrical supplier or local collec-
ting point for recyclable waste.
Note: Batteries containing pollutant substances
11
are marked as follows: Pb = Battery contains lead,
Cd = Battery contains cadmium, Hg = Battery
contains mercury.
Setting date, time and language
It is vital to set the date and time. This is the only way that
measurements can be saved and recalled with the correct date
and time.
13
the back of the monitor.
batteries. making absolutely
sure that you insert them with
the correct polarity as marked.
Never use rechargeable bat-
teries.
is continuously illuminated,
4xAA(LR6) 1,5 V