Machine Information; Technical Specifications - Ferm HTM1005 Originalbetriebsanleitung

turned off. A moment of inattention while
operating the hedge trimmer may result in
serious personal injury.
b) Carry the hedge trimmer by the handle with
the blade stopped and taking care not to
operate any power switch. Proper carrying
of the hedge trimmer will decrease the risk
of inadvertent starting and resultant personal
injury from the blades.
c) When transporting or storing the hedge
trimmer, always fit the blade cover. Proper
handling of the hedge trimmer will decrease
the risk of personal injury from the blades.
d) When clearing jammed material or servicing
the unit, make sure all power switches are
off and the power cord is disconnected.
Unexpected actuation of the hedge trimmer
while clearing jammed material or servicing
may result in serious personal injury.
e) Hold the hedge trimmer by insulated
gripping surfaces only, because the blade
may contact hidden wiring or its own cord.
Blades contacting a "live" wire may make
exposed metal parts of the hedge trimmer
"live" and could give the operator an electric
shock.
f) Keep all power cords and cables away from
cutting area. Power cords or cables may
be hidden in hedges or bushes and can be
accidentally cut by the blade.
g) Do not use the hedge trimmer in bad
weather conditions, especially when there
is a risk of lightning. This decreases the risk
of being struck by lightning.
h) Inspect and maintain the trimmer regularly.
Have the trimmer repaired only by an
authorised repairer.
i) Keep your hands and feet away from the
cutting area at all times.
j) Always hold the trimmer at a safe distance
from the body.
k) Always wear protective goggles.
l) Always wear gloves.
m) Only use the trimmer in daylight.
n) Ensure the ventilation openings are clear of
debris at all times.
o) Ensure there are no people of animals
within 5 metres of your trimming area.
ADDITIONAL SAFETY WARNINGS
FOR CORDLESS HEDGE TRIMMER
• Do not charge hedge trimmer in rain, or in wet
locations.
• Do not use battery-operated hedge trimmer in
rain.
• Remove or disconnect battery before
servicing, cleaning, or removing material from
the hedge trimmer.
• Do not dispose of the battery(ies) in a fire. The
cell may explode. Check with local codes for
possible special disposal instructions.

2. MACHINE INFORMATION

Intended use
This hedge trimmer is only intended for cutting
branches from shrubs, bushes, ornamental plants
and hedges.

TECHNICAL SPECIFICATIONS

Model No.
Rated voltage
No load speed
Cutting length
Cutting width
Weight
Sound pressure level LPA
Sound power level LWA
Vibration value:
Front handle Ah
Rear handle Ah
Only use the following batteries of the FX-POWER
20V battery platform. Using any other batteries
could cause serious injury or damage the tool.
CDA1167 20V, 2Ah Lithium-Ion
CDA1168 20V, 4Ah Lithium-Ion
The following charger of the can be used to
charge these batteries.
CDA1169 Charger adapter
CDA1170 Quick charger
The batteries of the FX-POWER 20V battery
platform are interchangeable with all the FERM
FX-POWER battery platform tools.
HTM1005
20V
1.200/min.
450mm
14mm
1.98 kg
81.3 db (A), KpA=3 dB (A)
92.9 db (A), KwA=3 dB (A)
2.459 m/s , K=1.5 m/s
2 2
1.754 m/s , K=1.5 m/s
2 2
7