Setup For Profibus; Parameter Assignment - HBM Profibus MP55DP Bedienungsanleitung

30
6

Setup for Profibus

6.1 Parameter assignment

The amplifier parameters are set via the keyboard or CAN-interface, as on the
MP55DP. The Profibus DP parameter assignment telegram defines some
parameters for the DP communication. If you use Profibus parameter
assignment tools which are able to evaluate the GSD files of GSD revision 1,
the following parameters are available for selection:
Parameter name
Diagnosis
Data format
Zeroing control bit
Taring control bit
Clear maximum
control bit
Clear minimum
control bit
Hold maximum
control bit
Hold minimum
control bit
Parameter set
control bit
Tab 6.1: Meaning of the parameters
The data format set applies to all the measured values exchanged in the
cyclical data communication. The definition of the decimal places for the
formats integer 16 bits and integer 32 bits is adopted from the module setup
(display, CAN bus) (e.g. when 3 decimal places is specified, 2.0 mm is
communicated as integer value 2000). The choice of data format also affects
the length of the input data (integer 16 bits = 1 word per analogue value,
integer 32 bits and floating = 2 words per analogue value).
HBM
Available Default
values
locked released
released
integer 16 bits integer 16 bits
integer 32 bits
floating point
locked
released
locked
released
locked
released
locked
released
locked
released
locked
released
locked
released
operation of external diagnosis
defines the coding format for
locked operates function for control of
output control word
locked operates function for control of
output control word
locked operates function for control of
output control word
locked operates function for control of
output control word
locked operates function for control of
output control word
locked operates function for control of
output control word
locked operates function for control of
output control word
PME-MP55DP
Meaning
measured values
A0582-3.1 de/en/fr