16.5. Factory settings
Select this entry and confirm the subsequent prompt with
to the factory settings.
All existing network information will be deleted and will have to be re-entered to
establish a network connection.
16.6. Software Update
You can search for and, if need be, install software updates using this function.
16.6.1. Auto Update
Select the entry
YES
16.6.2. Check now
Starts the search for software updates immediately.
16.7. Start wizard
Starts the setup wizard as described in the section 'Using the device for the first
time' .
16.8. Information
This section displays the software version and the device's radio ID.
16.9. Display illumination
You can adjust the display lighting with this function:
− Dim the display in standby mode or operating mode after a specified time
− Display brightness
Setting the dimming time in operation
Select the entry
ON, 10, 20,30, 45,60, 90, 120
Display brightness in standby
Select the entry
OK
dial and then set the desired brightness level to
Setting the dimming time in standby
Select the entry
20,30, 45,60, 90, 120
Display brightness in operation
Select the entry
and then set the desired brightness level to
to enable regular automatic searches for software updates.
STANDBY TIMEOUT:
HELLIGKEIT IM STANDBY
TIMEOUT:
and then turn the
or
180
POWER-ON LEVEL
YES
and then turn the
or
seconds.
180
by turning and then pressing the
MEDION
OK
dial to select
seconds.
by turning and then pressing the
HIGH
,
MEDIUM
to reset the device
OK
dial to select
or
.
LOW
ON, 10,
OK
dial
,
LOW
.
DE
EN
TR
77