Troubleshooting - Klarstein SAINT HELENS STUDIO LOFT 2 Bedienungsanleitung

TROUBLESHOOTING

Problem
"EE" is displayed on the
screen.
"88" is displayed on the
screen.
The screen displays "OP".
No electricity, the logs are
not glowing.
Possible cause
Short circuit
No warm air is blowing
out and the fan is not
working.
The open window warning
(if the ambient temperature
drops by 4 °C/ 8°F or
more within 10 minutes
and the temperature does
not rise within 42 minutes)
has been activated and
the unit will switch off
automatically.
The mains plug is not
plugged in.
Solution
Contact customer service
to have the thermostat
sensor replaced
Set the power switch to
the "off" position and wait
at least 10 minutes. Then
return the power switch to
the "on" position.
Inspect the unit and ensure
that the air inlets and
outlets are not blocked
as this could cause the
unit to overheat. Unplug
the device from the mains
outlet for 30 minutes
so that it can cool off.
Afterwards, plug the
power cord back into
the mains socket and
switch on the device. If the
problem persists, contact
customer service.
Make sure the mains cord
of the device is plugged
into a 220-240V outlet.
Press the on/off button
several times and make
sure that the power switch
is in the "on" position.
EN
65